FAQ
Precautions during bending processing
View Answer
The number of teeth of the tool is 8 teeth. When cutting with a composite board, the processing state of the slotting will be poor. When cutting over the edge, the bottom plate will be peeled off. The number of teeth of the front tool is 18-24 teeth. It is recommended to use a special tool.
The TOOL DOES NOT USE THE SHAPE RECOMMENDED IN ITEM 2. WHEN USING A TOOL WITH A FLAT TIP OF THE BLADE TO PROCESS GROOVING, THE CORNERS ARE UNEVEN AFTER BENDING, AND IT IS RECOMMENDED TO USE THE RECOMMENDED SPECIAL TOOL FOR IRREGULARITIES.
The angle of the tool width is 90. When using Cutter, it is difficult to bend the 90 of the flange after cutting. It is recommended to use a tool with an angle of 91.
Precautions when slotting
View Answer
A. Double bending and cross-section inconsistency:
-When slotting, the outer plate is processed to a depth of 0.2mm.
-The insertion of the bending fixture into the flange is not enough, it is recommended to insert the fixture into the flange to the maximum extent and bend it.
-The proficiency of the operator is required when slotting. It is recommended to use professional and technical personnel.
-Due to the uneven pressure of GroovingM/C, the processing depth is poor and the bending part is uneven. It is hoped that the processing pressure of the machinery will be kept stable.B.The phenomenon of the core plate and the bottom plate falling off:
-When Saw will produce peeling processing, SawCutting should be fully inspected and processed.
-When Notching, do not exceed the Grooving machining center line, otherwise the effect after bending will not meet the requirements of the drawing.
Shandong Rekton Metal Products Co., Ltd.
Address:Xinzhai Street, Linqu County, Weifang City, Shandong Province
Quick Navigation
